The G7b5 ukulele chord contains G, B, C#, F. Its first ukulele voicing is a barre chord at fret 1: G string open; C string at fret 1 (index finger); E string at fret 1 (index finger); A string at fret 2 (middle finger). As a 7th flat 5th chord it has a distinct job in a progression, and this page explains that job alongside the fingerings, the notes and the practice steps that make it stick.
What notes are in the G7b5 chord?
The G7b5 chord is a 7th flat 5th chord, and its notes are fixed: G, B, C#, F. Every voicing on every instrument uses these same notes, in some order and in some octave — change one of them and you are playing a different chord. The table below lists each note with its interval from the root G, so you can see the structure of G7b5 at a glance. On the ukulele, the barre chord of G7b5 puts those notes under your fingers in the order the fingering lists them.
| Note | Interval |
|---|---|
| G | Root |
| B | 3 |
| C# | b5 |
| F | b7 |
The root is G, the note the chord is named after and the note your ear hears as home. Above it, the intervals in G7b5 are 3, b5, b7. Those intervals are the fingerprint of the 7th flat 5th quality — any chord with the same interval pattern, on any root, is the same kind of chord. On the ukulele, the notes appear in the order the fingering dictates, but the set of notes never changes.
G7b5 sounds restless and altered, the sound of a dominant chord that has been bent out of shape on purpose. That character comes straight from the intervals above, not from the instrument: the same notes on piano, guitar or ukulele carry the same colour, even though the voicing changes. On the ukulele, start with the first voicing above and listen for the notes G, B, C#, F in G7b5.
Comparing G7b5 with its closest relatives helps to fix it in your ear. In short, 7b5 against dominant 7th: G7b5 flattens the 5th to C# where the plain dominant 7th keeps the perfect 5th D. That one change adds a whole new layer of tension. Practise the two chords back to back and listen to the one note that changes — that single note is the difference between the two chords. On the ukulele, the barre chord voicing is the place to hear it in G7b5.
How to play G7b5 on ukulele
On the ukulele, G7b5 has 3 voicings in the data below, and each one uses the same notes — G, B, C#, F — in a different place on the neck. There are 3 voicings listed for G7b5 on the ukulele; learn the first, then add the others as you need them. Finger numbers below use 1 for the index finger, 2 for the middle finger, 3 for the ring finger and 4 for the little finger, and x means the string is not played.
The barre chord is the voicing to learn if you want G7b5 in open position: G string open; C string at fret 1 (index finger); E string at fret 1 (index finger); A string at fret 2 (middle finger). It barres across strings 2 to 3 at fret 1 with the index finger. The barre is the hard part: the index finger must press every string from 2 to 3 evenly at fret 1, so roll it slightly onto its bony side and keep it close to the fret wire. If the barre buzzes, move it a fraction closer to the fret and press from the arm, not the thumb alone. Strum or pluck it slowly first and check that every note in G7b5 — G, B, C#, F — sounds, with no buzz and no accidental open string.
For the movable voicing, G7b5 sits in around fret 4: G string open; C string at fret 5 (middle finger); E string at fret 7 (ring finger); A string at fret 4 (index finger). The stretch is the challenge: the fretted notes span from fret 4 to fret 7, so keep your thumb low behind the neck and let your fingers reach rather than squeezing the neck. Strum or pluck it slowly first and check that every note in G7b5 — G, B, C#, F — sounds, with no buzz and no accidental open string.
For the movable voicing, G7b5 sits in around fret 3: G string at fret 4 (middle finger); C string at fret 5 (little finger); E string at fret 3 (index finger); A string at fret 4 (ring finger). This voicing is comfortable because the fretted notes sit close together, from fret 3 to fret 5, so your hand stays relaxed and every note can ring. Strum or pluck it slowly first and check that every note in G7b5 — G, B, C#, F — sounds, with no buzz and no accidental open string.
Choosing between the voicings of G7b5 is a musical decision, not a right-or-wrong one. The open or low-position voicing rings the most and suits strumming, while a barre or movable voicing lets you slide G7b5 up the neck to any key without changing the shape. When you change chords, pick the voicing of G7b5 that sits closest to the chord before it — shorter moves between shapes mean faster, cleaner changes. Practise the change into G7b5 from the chord that comes before it in your song, not the chord on its own, because the move is the skill. On the ukulele, the barre chord of G7b5 puts those notes under your fingers in the order the fingering lists them.
A short practice routine for G7b5 on the ukulele: play the first voicing four times slowly, checking each note, then change to it from the chord a fourth above G and back, four times, at a slow tempo. Then play the second voicing the same way. If a note buzzes, stop and fix the finger placement rather than playing through the buzz — clean notes at a slow tempo become clean notes at full tempo, while buzzes practised fast become habits. Use the Ukulele Chord Finder to see the diagram for G7b5 while you practise, and the Chord Finder to compare it with the same chord on other instruments.
Common mistakes
These are the mistakes that most often make G7b5 sound wrong on the ukulele, and each one has a concrete fix. Work through them one at a time rather than trying to fix everything at once.
Using it as a tonic. G7b5 is a dominant chord, and an altered one at that. It wants to resolve, usually to the tonic a fourth above its root. On the ukulele, the barre chord voicing is the place to hear it in G7b5.
Voicing it too low. The flattened 5th low down can sound muddy against the root. Keep C# in a higher octave. On the ukulele, start with the first voicing above and listen for the notes G, B, C#, F in G7b5.
Overusing altered dominants. A run of altered chords loses its effect. Use G7b5 where the tension earns its place — before a resolution. On the ukulele, the barre chord voicing is the place to hear it in G7b5.
Pressing too hard on the nylon strings. Ukulele strings need far less pressure than guitar strings, and pressing hard on G7b5 pulls the notes sharp and tires the hand. Use the lightest touch that gives a clean note, and keep your fingers close to the frets. On the ukulele, the barre chord voicing is the place to hear it in G7b5.
Where G7b5 is used
G7b5 is not a diatonic triad in any major or minor key, because it is an extended or altered chord, but its base triad belongs to the key of C major, the key of D major, the key of G major. a passing dominant in chromatic progressions. As a dominant-type chord it also points toward C major, the key a perfect fourth above G, which is the tonic it most often resolves to. That is where G7b5 does its work: not as a home chord, but as a chord that creates movement and then resolves. On the ukulele, the barre chord of G7b5 puts those notes under your fingers in the order the fingering lists them.
Because G7b5 is an extended or altered chord, it appears in progressions as a colour or a dominant rather than as a diatonic staple. Try it in place of the plain G triad in a progression you already know, and listen to how the extra notes change the feel — that substitution is the usual way extended chords enter real music. The Chord Progression Builder lets you try G7b5 in a progression in any key and hear how it connects to the chords around it. On the ukulele, the barre chord of G7b5 puts those notes under your fingers in the order the fingering lists them.
The same chord on other instruments is covered in G7b5 on guitar, G7b5 on piano, G7b5 on bass, and the scales that fit over it are the G major scale and the G minor pentatonic scale. Learning G7b5 on the ukulele and then checking it on another instrument is one of the best ways to fix the notes — G, B, C#, F — in your memory, because the notes stay the same while everything else changes.
Practising G7b5
A short worked example makes G7b5 concrete. Play the four-chord progression C – G – Am – F in C major, the key G7b5 most often resolves toward: C – G – Am – F. Play each chord for one bar at a slow tempo, and listen to how G7b5 sounds in that sequence — whether it feels like home, like a lift, or like a chord on its way somewhere else. Then play the same four chords in a different order, starting on G7b5 itself, and notice how its character changes when it opens the progression instead of sitting inside it. On the ukulele, start with the first voicing above and listen for the notes G, B, C#, F in G7b5.
For a second exercise, play G7b5 and then the chord a fourth above G, back and forth, four times each. That move — a chord and the chord a fourth above it — is the most common resolution in Western music, and it is the move G7b5 is built for when it acts as a dominant. Finish by playing G7b5 on its own, slowly, and naming each note out loud as you play it: G, B, C#, F. Naming the notes while you play them is what turns a shape into knowledge you can use in any key. Test yourself with the Practice Chord Quiz and keep time with the Metronome as the tempo rises. On the ukulele, the barre chord of G7b5 puts those notes under your fingers in the order the fingering lists them.
Frequently asked questions
How do you play G7b5 on the ukulele?
The first voicing is the barre chord: frets 0–1–1–2, fingers 0–1–1–2, on the ukulele. That voicing uses the notes G, B, C#, F, and it is the one to learn first. The page above lists more voicings for G7b5, so you can choose the shape nearest the chords around it.
Is G7b5 hard to play on the ukulele?
It depends on the voicing. The first voicing of G7b5 on the ukulele is the easiest starting point, and the movable voicings further up the neck are harder because they need a barre or a wider stretch. Practise the first voicing cleanly at a slow tempo before you try the others, and the harder shapes will come more easily.
What is the easiest voicing of G7b5 on the ukulele?
The barre chord is the easiest voicing listed for G7b5 on the ukulele: frets 0–1–1–2, fingers 0–1–1–2. Learn that shape first, get every note ringing cleanly, and only then move on to the alternative voicings further up the neck.
What notes are in G7b5?
G7b5 contains G, B, C#, F: root G, major 3rd B, flattened 5th C# and flattened 7th F. The flattened 5th is the note that makes it an altered dominant. On the ukulele, the voicings above put that note under your fingers.
What is the difference between G7b5 and G7?
G7 has the perfect 5th D; G7b5 flattens it to C#. G7b5 sounds tenser and more chromatic, and it is used as an altered dominant in jazz. On the ukulele, the voicings above put that note under your fingers.