On the guitar, the G#dim chord is the diminished chord built from G#, B, D. Its first guitar voicing is the open position: low E string at fret 4 (ring finger); A string at fret 2 (middle finger); D string open; G string at fret 1 (index finger); B string open; high e string at fret 4 (little finger). Keep this page open while you practise: it lists the notes, every practical voicing, the mistakes that make it sound wrong and the progressions where it does its best work.
What notes are in the G#dim chord?
The G#dim chord is a diminished chord, and its notes are fixed: G#, B, D. Every voicing on every instrument uses these same notes, in some order and in some octave — change one of them and you are playing a different chord. The table below lists each note with its interval from the root G#, so you can see the structure of G#dim at a glance. On the guitar, start with the first voicing above and listen for the notes G#, B, D in G#dim.
| Note | Interval |
|---|---|
| G# | Root |
| B | b3 |
| D | b5 |
The root is G#, the note the chord is named after and the note your ear hears as home. Above it, the intervals in G#dim are b3, b5. That combination is what makes G#dim sound the way it does: the intervals decide the colour, and the root decides the pitch. On the guitar, the notes appear in the order the fingering dictates, but the set of notes never changes.
G#dim sounds eerie and compressed, a chord built from two minor 3rds stacked on each other. That character comes straight from the intervals above, not from the instrument: the same notes on piano, guitar or ukulele carry the same colour, even though the voicing changes. On the guitar, start with the first voicing above and listen for the notes G#, B, D in G#dim.
Comparing G#dim with its closest relatives helps to fix it in your ear. In short, diminished against minor: both have the minor 3rd B, but G#dim flattens the 5th to D where the minor chord keeps the perfect 5th D#. Practise the two chords back to back and listen to the one note that changes — that single note is the difference between the two chords. On the guitar, the open position of G#dim puts those notes under your fingers in the order the fingering lists them.
How to play G#dim on guitar
On the guitar, G#dim has 3 voicings in the data below, and each one uses the same notes — G#, B, D — in a different place on the neck. Start with the first voicing and get it clean before you try the movable shapes further up the neck. Finger numbers below use 1 for the index finger, 2 for the middle finger, 3 for the ring finger and 4 for the little finger, and x means the string is not played.
Another way to play G#dim is the open position, in open position: low E string at fret 4 (ring finger); A string at fret 2 (middle finger); D string open; G string at fret 1 (index finger); B string open; high e string at fret 4 (little finger). The stretch is the challenge: the fretted notes span from fret 1 to fret 4, so keep your thumb low behind the neck and let your fingers reach rather than squeezing the neck. Strum or pluck it slowly first and check that every note in G#dim — G#, B, D — sounds, with no buzz and no accidental open string.
Another way to play G#dim is the barre chord, in around fret 4: low E string at fret 4 (index finger); A string at fret 5 (middle finger); D string at fret 6 (ring finger); G string at fret 4 (index finger); B string open; high e string at fret 7 (little finger). It barres across strings 1 to 4 at fret 4 with the index finger. The barre is the hard part: the index finger must press every string from 1 to 4 evenly at fret 4, so roll it slightly onto its bony side and keep it close to the fret wire. If the barre buzzes, move it a fraction closer to the fret and press from the arm, not the thumb alone. Strum or pluck it slowly first and check that every note in G#dim — G#, B, D — sounds, with no buzz and no accidental open string.
For the movable voicing, G#dim sits in around fret 2: low E string at fret 4 (middle finger); A string at fret 2 (index finger); D string open; G string at fret 4 (ring finger); B string open; high e string at fret 4 (little finger). This voicing is comfortable because the fretted notes sit close together, from fret 2 to fret 4, so your hand stays relaxed and every note can ring. Strum or pluck it slowly first and check that every note in G#dim — G#, B, D — sounds, with no buzz and no accidental open string.
Choosing between the voicings of G#dim is a musical decision, not a right-or-wrong one. The open or low-position voicing rings the most and suits strumming, while a barre or movable voicing lets you slide G#dim up the neck to any key without changing the shape. When you change chords, pick the voicing of G#dim that sits closest to the chord before it — shorter moves between shapes mean faster, cleaner changes. Practise the change into G#dim from the chord that comes before it in your song, not the chord on its own, because the move is the skill. On the guitar, the open position voicing is the place to hear it in G#dim.
A short practice routine for G#dim on the guitar: play the first voicing four times slowly, checking each note, then change to it from the chord a fourth above G# and back, four times, at a slow tempo. Then play the second voicing the same way. If a note buzzes, stop and fix the finger placement rather than playing through the buzz — clean notes at a slow tempo become clean notes at full tempo, while buzzes practised fast become habits. Use the Guitar Chord Finder to see the diagram for G#dim while you practise, and the Chord Finder to compare it with the same chord on other instruments.
Common mistakes
These are the mistakes that most often make G#dim sound wrong on the guitar, and each one has a concrete fix. Work through them one at a time rather than trying to fix everything at once.
Voicing it too low. A diminished triad low down sounds muddy because its notes are close together. Use a higher voicing or spread the notes across octaves. On the guitar, start with the first voicing above and listen for the notes G#, B, D in G#dim.
Confusing it with the half-diminished 7th. The half-diminished chord adds a flattened 7th to this triad. G#dim on its own has only three notes: G#, B, D. On the guitar, the open position voicing is the place to hear it in G#dim.
Barre collapsing on the high strings. In a barre voicing of G#dim, the high strings are the ones that buzz first, because the index finger presses hardest near the thumb. If the top notes of G#dim sound dead, roll the barring finger slightly toward the fret and press from the arm, not from squeezing the neck. On the guitar, start with the first voicing above and listen for the notes G#, B, D in G#dim.
Playing a perfect 5th. If the 5th is D# instead of D, the chord is minor, not diminished. The flattened 5th is the note that defines this chord. On the guitar, the open position of G#dim puts those notes under your fingers in the order the fingering lists them.
Where G#dim is used
As a diatonic chord, G#dim belongs to the key of A major, the key of F# minor. In those keys it is one of the seven chords built from the key's own notes, so it fits without any chromatic notes. the vii° chord in major keys, leading straight to the tonic. That is the practical meaning of belonging to a key: the chord sounds settled there, and the other chords of the key lead to it and away from it naturally. On the guitar, the open position voicing is the place to hear it in G#dim.
Because G#dim is an extended or altered chord, it appears in progressions as a colour or a dominant rather than as a diatonic staple. Try it in place of the plain G# triad in a progression you already know, and listen to how the extra notes change the feel — that substitution is the usual way extended chords enter real music. The Chord Progression Builder lets you try G#dim in a progression in any key and hear how it connects to the chords around it. On the guitar, the open position of G#dim puts those notes under your fingers in the order the fingering lists them.
The same chord on other instruments is covered in G#dim on piano, G#dim on ukulele, G#dim on bass, and the scales that fit over it are the G# major scale and the G# minor pentatonic scale. Learning G#dim on the guitar and then checking it on another instrument is one of the best ways to fix the notes — G#, B, D — in your memory, because the notes stay the same while everything else changes.
Practising G#dim
A short worked example makes G#dim concrete. Play the four-chord progression A – E – F#m – D in A major, where G#dim is diatonic: A – E – F#m – D. Play each chord for one bar at a slow tempo, and listen to how G#dim sounds in that sequence — whether it feels like home, like a lift, or like a chord on its way somewhere else. Then play the same four chords in a different order, starting on G#dim itself, and notice how its character changes when it opens the progression instead of sitting inside it. On the guitar, the open position of G#dim puts those notes under your fingers in the order the fingering lists them.
For a second exercise, play G#dim and then the chord a fourth above G#, back and forth, four times each. That move — a chord and the chord a fourth above it — is the most common resolution in Western music, and it is the move G#dim is built for when it acts as a dominant. Finish by playing G#dim on its own, slowly, and naming each note out loud as you play it: G#, B, D. Naming the notes while you play them is what turns a shape into knowledge you can use in any key. Test yourself with the Practice Chord Quiz and keep time with the Metronome as the tempo rises. On the guitar, start with the first voicing above and listen for the notes G#, B, D in G#dim.
Frequently asked questions
Is G#dim hard to play on the guitar?
It depends on the voicing. The first voicing of G#dim on the guitar is the easiest starting point, and the movable voicings further up the neck are harder because they need a barre or a wider stretch. Practise the first voicing cleanly at a slow tempo before you try the others, and the harder shapes will come more easily.
What is the easiest voicing of G#dim on the guitar?
The open position is the easiest voicing listed for G#dim on the guitar: frets 4–2–0–1–0–4, fingers 3–2–0–1–0–4. Learn that shape first, get every note ringing cleanly, and only then move on to the alternative voicings further up the neck.
Why does G#dim sound tense?
Its 5th is flattened to D, a tritone above the root G#. The tritone is the most unstable interval in Western music, and it makes the chord want to resolve. On the guitar, the voicings above put that note under your fingers.
What notes are in G#dim?
G#dim contains G#, B, D: the root G#, the minor 3rd B and the diminished 5th D. It is two minor 3rds stacked — G# to B, then B to D. On the guitar, the voicings above put that note under your fingers.
Where is G#dim used?
Most often as the vii° chord in a major key, leading to the tonic, and as a passing chord between two chords a whole step apart. It also substitutes for a dominant 7th chord. On the guitar, the voicings above put that note under your fingers.